Merck 100201 Phenol EMPROVE® (Fenol)
Merck 100201 Phenol EMPROVE® (Fenol)

Merck 100201 Phenol EMPROVE® (Fenol) (M100201.1000)

Marka : Merck
Fiyat : ₺0,00  + KDV
KDV Dahil : ₺0,00

Almanya’da Merck Millipore firması tarafından üretilen merck kimyasalları, farklı ambalaj seçenekleri ile satılmaktadır. Kalitesi ve kullanım alanları ile birçok firma ve kurumun tercih ettiği merck marka kimyasallar konusunda firmamız yetkili satıcıdır. Kimyasal madde ihtiyaçlarınızda bizimle iletişime geçebilirsiniz. (Şahıslara kimyasal satışımız yoktur.)

Merck 100201 Phenol EMPROVE® (Fenol)

ADET :

Merck 100201 Phenol EMPROVE® (Fenol)

Ürün 1 kg ambalajdır.

Açıklama
Catalogue Number100201
SynonymsHydroxybenzene, Carbolic acid
DescriptionPhenol
Product Information
CAS number108-95-2
EC index number604-001-00-2
EC number203-632-7
GradePh Eur,ChP,JP,USP
Hill FormulaC₆H₆O
Chemical formulaC₆H₅OH
Molar Mass94.11 g/mol
HS Code2907 11 00
Structure formula ImageStructure formula Image
Physicochemical Information
Density1.07 g/cm3 (20 °C)
Explosion limit1.3 - 9.5 %(V)
Flash point81 °C
Ignition temperature595 °C
Melting Point40.8 °C
pH value5 (50 g/l, H₂O, 20 °C)
Vapor pressure0.2 hPa (20 °C)
Bulk density620 kg/m3
Solubility84 g/l
Toxicological Information
LD 50 dermalLD50 Rat 660 mg/kg
Safety Information according to GHS
Hazard Pictogram(s)Hazard Pictogram(s)
Hazard Pictogram(s)
Hazard Pictogram(s)
Hazard Statement(s)H301 + H311 + H331: Toxic if swallowed, in contact with skin or if inhaled.
H314: Causes severe skin burns and eye damage.
H341: Suspected of causing genetic defects.
H373: May cause damage to organs through prolonged or repeated exposure.
Precautionary Statement(s)P280: Wear protective gloves/ protective clothing/ eye protection/ face protection.
P301 + P330 + P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P302 + P352: IF ON SKIN: Wash with plenty of soap and water.
P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P310: IF exposed or concerned: immediately call a POISON CENTER or doctor/ physician.
Signal WordDanger
RTECSSJ3325000
Storage class6.1A Combustible, acute toxic Cat. 1 and 2 / very toxic hazardous materials
WGKWGK 2 obviously hazardous to water
Disposal9
Carcinogenic compounds and flammable compounds labelled "Highly toxic" or "Toxic": container F. Alkyl sulfates are carcinogenic; Take particular care to avoid inhalation and skin contact. To neutralize alkyl sulfates, add dropwise (from a dropping funnel) to concentrated ice-cool Ammonia solution (Cat.No. 105426) with vigorous stirring. Before placing in container D, check the pH with pH Universal indicator strips (Cat.No. 109535).
Safety Information
Hazard SymbolsHazard SymbolsCorrosive
Hazard SymbolsToxic
Categories of dangertoxic, corrosive, mutagenic
R PhraseR 23/24/25-34-48/20/21/22-68
Toxic by inhalation, in contact with skin and if swallowed.Causes burns.Harmful: danger of serious damage to health by prolonged exposure through inhalation, in contact with skin and if swallowed.Possible risk of irreversible effects.
S PhraseS 24/25-26-28-36/37/39-45
Avoid contact with skin and eyes.In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.After contact with skin, wash immediately with plenty of soap and water.Wear suitable protective clothing, gloves and eye/face protection.In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
Storage and Shipping Information
StorageStore at +15°C to +25°C.
Transport Information
Declaration (railroad and road) ADR, RIDUN 1671 , 6.1, II
Declaration (transport by air) IATA-DGRUN 1671 , 6.1, II
Declaration (transport by sea) IMDG-CodeUN 1671 , 6.1, II

Specifications
Assay (bromatometric)99.0 - 100.5 %
Assay (bromatometric, calc. on anhydrous substance)99.0 - 100.5 %
Identity (IR-spectrum)passes test
Identity (wet chemistry)passes test
Appearancecolourless or faintly pink or faintly yellowish crystals or crystalline masses, deliquescent
Appearance of solution (67 g/l, water)clear and not more intensely coloured than reference solution B6
Acidic substancespasses test
Solidification temperature≥ 39.5 °C
Fe (Iron)≤ 1 ppm
Benzene (HS-GC)≤ 2 ppm
Methanol (HS-GC)≤ 3000 ppm
Acetone (HS-GC)≤ 2 ppm
Anisole≤ 10 ppm
Cumene (HS-GC)≤ 70 ppm
Methylisobutylketone (HS-GC)≤ 2 ppm
Other residual solvents (ICH (Q3C))excluded by manufacturing process
Residue on evaporation (105 °C, 1 h)≤ 0.05 %
Residue on evaporation (105 °C)≤ 0.05 %
Water (according to Karl Fischer)≤ 0.5 %
Elemental impurity specifications have been set considering ICH Q3D (Guideline for Elemental Impurities). Class 1-3 elements are not likely to be present above the ICH Q3D option 1 limit, unless specified and indicated (*).
Corresponds to Ph. Eur., ChP, JP, USP
Çerez Kullanımı

Alışveriş deneyiminizi iyileştirmek için yasal düzenlemelere uygun çerezler (cookies) kullanıyoruz. Detaylı bilgiye Gizlilik ve Çerez Politikası sayfamızdan erişebilirsiniz.